Classification society approvals
Works approval with the nine classification societies below is held by the WISCO mill. Where a scanned certificate has been obtained, click through to view it; the rest are still being prepared.
GL
Germanischer Lloyd — merged into DNV in 2013
Scan pending upload
BV
Bureau Veritas
RINA
RINA (Registro Italiano Navale)
Scan pending upload
WISCO distributor authorization
The distributor agreement is not published, as it covers specific commercial terms. Contact us or WISCO directly to verify the relationship.
Certificados de sistemas de gestión
Certificados de sistemas de gestión ISO e IATF emitidos a la acería que lamina nuestra chapa. Abarcan los sistemas de calidad, medio ambiente y calidad automotriz de la acería. La homologación de producto la acreditan los certificados de las sociedades de clasificación de arriba.
Titular del certificado: Wuhan Iron and Steel Company Limited
Certificados relacionados de Baoshan Iron & Steel
WISCO es una filial de Baoshan Iron & Steel Co., Ltd. Los certificados siguientes pertenecen a Baoshan Iron & Steel Co., Ltd. y recogen los sistemas de gestión y el laboratorio de la empresa matriz. Se muestran a título informativo.
Titular del certificado: Baoshan Iron & Steel Co., Ltd.
Gestión de la calidad, ISO 9001:2015
Certificate No. FM 70107
Valid until 2026-11-28
Gestión ambiental, ISO 14001:2015
Certificate No. EMS 83746
Valid until 2027-12-21
Seguridad y salud en el trabajo, ISO 45001:2018
Certificate No. OHS 83733
Valid until 2027-12-21
Gestión de la energía, ISO 50001:2018
Certificate No. 02224En024R3L
Valid until 2027-06-11
Gestión de la calidad automotriz, IATF 16949:2016
Certificate No. 30373
Valid until 2026-11-28
Gestión del cumplimiento, ISO 37301:2021
Certificate No. MSFC 798133
Valid until 2026-12-27
Acreditación de laboratorio de ensayo, ISO/IEC 17025:2017 (CNAS)
Certificate No. CNAS L0184
Valid until 2030-11-28
Approvals held by Hubei Lijin Iron and Steel
Hubei Lijin Iron and Steel Group Co., Ltd. (Zaoyang, Hubei) produces bulb flat steel and sections, and holds works approval from the eight classification societies below. The scope of each approval is as stated on its certificate.
Titular del certificado: Hubei Lijin Iron and Steel Group Co., Ltd.
CCS
China Classification Society
Bulb flat steel, to Chapter 3 of Part 1 of the CCS Rules for Materials and Welding.
Certificate No. WH25PWA00097_01
Issued 2025-10-30
Valid until 2030-04-28
ABS
American Bureau of Shipping
Steel mill approval, initial, under the ABS Rules for Materials and Welding Part 2 (2026). Renewal is due before the five-year expiry; the expiry date is on the attached pages.
Certificate No. STML-0519063
Issued 2026-09-30
Validity: see the certificate
DNV
DNV (formerly Det Norske Veritas)
Steelmaking and rolled steel products, normal and high strength steel, structural sections.
Certificate No. AMMM00003G8
Issued 2026-08-26
Valid until 2029-08-25
LR
Lloyd's Register
Steelmaking, semi-finished products and steel sections.
Certificate No. LR26335850WA
Issued 2026-08-12
Valid until 2029-08-11
BV
Bureau Veritas
BV Mode II scheme: plate, section and bar.
Certificate No. SMS.W.II./152815/A.0
Issued 2026-05-16
Valid until 2030-04-27
RINA
RINA (Registro Italiano Navale)
Bulb flat steel, grades A, B, D, E, AH32, AH36, DH32, DH36, EH32 and EH36.
Certificate No. FAB033526WS
Issued 2026-03-29
Valid until 2031-01-19
RS
Russian Maritime Register of Shipping (RS)
Recognition of the manufacturer for the materials listed in the annex. Subject to confirmation each 12 months.
Certificate No. 26.44.01.03061.269
Issued 2026-07-14
Valid until 2031-07-14
NK
ClassNK (Nippon Kaiji Kyokai)
Particulars of approval for shapes, grades KA, KB, KD, KE, KA32, KD32, KE32, KA36, KD36 and KE36, up to 14 mm, as rolled, electric arc furnace and continuous casting.
Certificate No. TA26894E
Issued 2026-08-24
Validity: see the certificate
How to verify a certificate
The certificates shown are scans of the originals, and each section names the mill that holds them. To verify independently, contact the classification society with the certificate number on each card. Every society keeps its own register of approved manufacturers.
EN 10204 3.1 vs 3.2
Every shipment is accompanied by a mill test certificate (MTC) reporting the actual chemistry and mechanical test results for that heat. EN 10204 defines two relevant certificate types:
- Type 3.1
- Issued and validated by the manufacturer's own authorized quality department — the standard form for most commercial shipments.
- Type 3.2
- Adds independent countersignature by a third-party inspector — typically the classification society surveyor — confirming the results. Used when the buyer's contract or classification society requires third-party witnessed inspection.
Mill test certificate contents
The MTC lists the heat number, chemical composition, and mechanical test results (ReH, Rm, elongation, and Charpy impact where required) for the specific heat your plate was rolled from. It is a separate document from the works approval certificates above: works approval certifies that the mill is qualified to produce a grade, while the MTC reports the actual results for one shipment. A sample MTC is not shown, because a real certificate carries a specific heat number and buyer details; every shipment is accompanied by the MTC for its own heat.
Need a certificate now?
GL and RINA certificates are still being prepared; ask if you need them. Send an enquiry or message us on WhatsApp.